Route 28 has no shortage of miniature golf courses for tourists seeking an alternative to the beach, but Wild Animal Lagoon in West Yarmouth is about to add an attraction that is sure to set it apart.

In mid-May, owner John Hutchins plans to set up a 16-by-16-foot outdoor mechanical bull, on a patch of grass about 30 feet from Route 28. He hopes its bucking and spinning, accompanied by the gleeful shouts of riders and spectators, will draw the attention of passers-by.

Hutchins believes he'll have the only mechanical bull on the Cape.A motorcyclist was killed in an accident involving an Upper Dublin Township trash trucks early Monday afternoon, according to officials.

The golf course owner said he's just trying to boost business. "Here, you only get three months to pay 12 months of bills," Hutchins said. "This is just a teaser for my golf."

The Yarmouth selectmen issued the permit for the mechanical bull Tuesday, despite protests from neighbors who predicted the bull would draw rowdy crowds that would disrupt their outdoor summer activities.Extensive experience and knowledge in the troubleshooting, maintenance, overhaul and commissioning of Gas Turbines (GE frame 6 and / or 7), gas compressors, dry gas seals, centrifugal pumps, reciprocating pumps, process valves, blowers, conveyor belt systems, v-belt drives, petrochemical pressure vessel and heat exchangers.

Homeowner David Robbins raised concern over increased noise and traffic.

Robbins was joined by Camp Street resident Theodore Dinsmoor.

"These are not the little ponies you see at the Cape Cod Mall," Dinsmoor told board members. "These are violent machines."

The bull presented "a major safety concern," he warned.

Hutchins said Friday the machine did cause an increase in his insurance, but he's not anticipating any major injuries.

The bull won't throw riders over its head,The approach uses fine Titanium Wire, laid one on another like a potter working with coils of clay. These wires are then smelted together in the rough shape of the desired component, cutting wasted material from potentially as much as 70 percent to as little as 10 percent. he said, but rather off to the side, where they will tumble safely onto large air mattresses. People will have to pay to ride the machine.

Hutchins said he's not interested in drawing "the barroom crowd" often associated with mechanical bulls.

"The clientele I'm trying to attract is the family crowd," he said. The minimum height requirement to ride is 48 inches, and, he said, "we plan to shut it down at 9 p.m."

Only a few neighbors attended Tuesday's discussion, and Dinsmoor said neighbors just don't realize what they're in for.

"Most of them are retired, and they didn't even know what a mechanical bull was," Dinsmoor said. "To me, the town is granting a blanket opportunity to put this bull outdoors without any study of what it is or what it does."

The Camp Street resident called the selectmen's approval "irresponsible."

Board Chairman Erik Tolley voted in favor of the permit, but conceded Friday the attraction could create problems.

"Mr. Hutchins is going to have issues that I'm sure he hasn't even realized yet, with crowds, parking and noise," Tolley said.Highly capable, 3-axis non-contact video measuring machine, suitable for both simple shop-floor quality control and advanced manufacturing inspection applications ... "We, as a board,Our full range of portable ultrasonic Flaw Detector (UT) provides unmatched capabilities for locating discontinuities and other flaws. generally give people the opportunity to succeed, but if there is a problem, we'll deal with it.Carbon wheels - Carbon Fiber Cycle Wheels,as China wholesaler,we offer best price carbon bike wheels in different types,quality guarantee,best carbon wheels."

China has overtaken Australia as New Zealand's biggest export market for the first time, buying more meat,For mains, there is a choice of Wild Rice’s ‘Chinese Fish ‘n Chips’ (beer-battered ling cod, Asian Tartar Sauce, taro shoestring frites) or its ‘meaty’ Grilled king oyster mushroom (with cashew ricotta and polenta fries). dairy products and pine logs, while shipments across the Tasman have fallen.

New Zealand's trade surplus was $718 million last month for an annual deficit of $520 million, according to Statistics New Zealand. The monthly surplus was almost twice the $373 million forecast in a Reuters survey and the annual gap is smaller than the forecast deficit of $970 million.

In the first quarter, exports to China jumped 32 per cent to $2.3 billion and imports rose 2.8 per cent to $1.8 billion, outpacing trade with nearest neighbour Australia, which took $2.2 billion of New Zealand's exports, down 7.3 per cent,profile projector is a shop tool used by designers and quality control technicians to view the profile of small machined parts as magnified image on screen.Our full range of portable ultrasonic Flaw Detector (UT) provides unmatched capabilities for locating discontinuities and other flaws. and sent $1.5 billion of its produce across the Tasman, down 5.3 per cent.

The rise of China to New Zealand's biggest trading partner underlines the importance of high-level delegations to Beijing, such as business and cultural mission led by Prime Minister John Key this month.

Exports to China have more than tripled since the signing of a free-trade agreement in 2008, while it is the largest source of foreign students and one of the fastest-growing sources of tourists.

The New Zealand dollar ticked up to 85.07 US cents after the trade data was released, from 84.The Spectrophotometer is an instrument which measures the amount of light of a specificed wavelength which passes through a medium.96 cents immediately before.

Total exports in March from the same month last year rose 5.1 per cent to $4.4 billion, led by an 18 per cent rise in meat and edible offal.

Exports of logs, wood and wood articles rose 28 per cent to $336 million, led by pine logs. Shipments of milk powder, butter and cheese were little changed, rising 0.1 per cent, while petroleum products other than crude oil fell 89 per cent.

Imports fell 7.9 per cent to $3.7 billion. Petroleum product imports fell 14 per cent, mainly reflected a decline in crude oil,Highly capable, 3-axis non-contact video measuring machine, suitable for both simple shop-floor quality control and advanced manufacturing inspection applications ... mechanical machinery declined 10 per cent and vehicles rose 4.1 per cent.

ASB Bank economist Christina Leung said she expected China would remain a key support for New Zealand's export growth, given its increasing protein needs as the country's middle class expands.

"However, offsetting this in the near term will be the effects of the drought, which we expect will weigh on dairy exports over the coming months."

"Overall, we expect moderate production growth over 2013, as drought weighs on pastoral export volumes. We continue to expect the Reserve Bank to keep the OCR on hold until March 2014, balancing off the drought and high exchange rate against rising inflation pressures from the housing market and Canterbury rebuild."

Westpac Bank economist Nathan Penny said the March trade balance increased more than expected on the back of temporarily weak imports.

"This improvement may continue for another month or two before the drought begins to weigh on commodity export volumes and as the Canterbury rebuild increasingly adds to demand for imports. Trade deficits will persist from that point."

Exports rose 0.8 per cent in seasonally adjusted terms, as forestry, crude oil and aluminium recorded large increases, said Penny. He thinks that of this bunch, he only expected increasing forestry exports to endure.

"Forestry exports are trucking along nicely, buoyed by robust Chinese demand and competing exporters such as Canada focusing on a recovering US housing market."

Imports fell 0.7 per cent in seasonally adjusted terms, which Penny put down largely to volatility rather than any underlying weakness.http://www.titanium-supplier.net/ specialize in providing worldwide customers with all types of Titanium fabricated products such as Titanium wire, Titanium rod and ingot, Titanium sheet and plate, etc. Imports of petroleum and products were up 44 per cent while 5 of the 6 other main categories recorded falls.

"We expect normal service to resume in the coming months as imports increase in line with the accelerating Canterbury rebuild and increasing consumer confidence."

This year’s Riverina Field Days is being held at the Griffith Showgrounds for the seventh consecutive year on May 10 and 11.

Organisers are excited by the response of exhibitors to this year’s event with over 200 exhibitors lined up, over 60 of which will be at the weekend for the first time.If you like BMW cars,then you will probably like their new gaming mouse, the super sexy, sleek as a Titanium Sheet off the pressing mat Level 10 M Gaming Mouse.

Alongside the assembly of expensive machinery there will also be a number of motor vehicle exhibitors, giving visitors a chance to compare different vehicles.http://www.ppnonwovenbag.com/，which was founded in 2008,specializes in designing, producing and selling recycle bags.

The Griffith Aero Club will be putting on a large display and offering the chance to enjoy a helicopter joy ride as well as holding a raffle with the prize being a free trainee flight.A china pressure vessel is a closed container designed to hold gases or liquids at a pressure substantially different from the ambient pressure.

A new addition is available for smaller exhibitors this year with the General Interest and Information Marquee,Our push or plunger lock are popular additions by engineers in a wide variety of products. ideal for exhibitors who only wish to display an information booth.

Budding inventors are being encouraged to enter the Power Farming Inventors Competition, a challenge for novice inventors to explore new innovations and submit them to a judging panel.

Entries will still be taken up to 5pm on Monday 6 May and entry into the competition is free.

Visitors are able to use the free designated public parking areas within the showground.

The main parking area is accessible via the Walla Avenue entrance.White soft Floor polishing pad for 15 inch machines. Ideal for high gloss dry polishing buffing of polished sealed floors.

The main gate prize is provided AD tours with a $600 voucher going to the winner to spend on any of the company’s products.

The weekend will open at 9am on Friday May 11 running through to 5pm before reopening at 9am on Saturday May 12 and finishing the weekend off at 4pm that afternoon.

Entry costs are $6 for adults, $3 for aged pensioners and school children over 12 and free for children under 12.We remain on Excavator track link to achieve our full year production guidance of 250000 ounces.

While this year’s edition is quickly filling up, there are still spaces available for individuals or businesses interested in being involved in the Riverina Field Days.

EPIC Systems,The product range of mechanical lock cylinder extends beyond the common range of double, single, thumbturn and furniture cylinders. Inc. has announced the promotion of Ken Sipes to Process & Mechanical Group Manager from Project Coordinator. All process and mechanical engineers,Instead, businesses can offer thicker plastic bags or handled paper bags. They can also give or sell you recycle bag, or offer no bags at all. project managers, and piping designers report directly to Sipes. His expanded role includes mentoring,Eight tips for choosing the right diamond Concrete saw blade including determining wet or dry cutting, blade compatibility, CSDA codes, and more. overseeing project assignments, design and estimate reviews, and many of his duties from his previous role of Project Coordinator.

“Ken has been one of the best project managers that EPIC has had,” says John Schott, President of EPIC Systems, Inc. “He is very level-headed and a clear thinker through tough situations. We want Ken to take these skills and mentor as many people within EPIC as possible. He makes an excellent mentor because he doesn’t give up on people prematurely” continues Schott.

“It is rare to find someone who is both a good designer and an excellent project manager. Ken has also been involved in championing and completing many initiatives, involving safety,titanium alloy property information is scattered amongst a number of disparate sources. quality, shop efficiency, project management, cost containment, etcetera,We sell Excavator undercarriage parts for all modern machines including Cat, Hitachi, Komatsu, Hyundai. to make EPIC better,” remarked Schott

Sipes has been with EPIC for almost six years. He is being promoted from his role as Project Coordinator and was previously a Project Manager/ Process Mechanical Engineer. In the Project Coordinator role, Sipes reviewed all projects plans before they went to the fabrication shop. He also oversaw all shop related activities, including: manpower scheduling and performance evaluations, shop/ building improvements and tooling/ equipment asset analysis.

Sipes has nearly 12 years of industrial manufacturing experience and has been an integral part of EPIC’s full service engineering,Probably the most popular among foodies,button mushroom is known for being juicy and tasty, inexpensive and with a flavor that’s only “mildly mushroomy”. fabrication and installation project management team for almost six years. He holds a Bachelor of Science in Mechanical Engineering from Southern Illinois University at Edwardsville and completed an EIT certification.

“I have been incredibly fortunate at EPIC to be given the opportunity to continue my career growth. My new role has already been both challenging and rewarding. Throughout my career I have been blessed with great mentors. While working to continuously improve the execution of our entire group, I plan to blend the methods of my mentors with my own ideas, to help develop our young engineers and designers,” says Sipes.

A new endowment honoring retiring College of Engineering Dean David N. Wormley and his wife,A motorcyclist was killed in an accident involving an Upper Dublin Township trash trucks early Monday afternoon, according to officials. Shirley, will continue the dean's legacy of educating future engineers.

The endowment, called the David and Shirley Wormley Excellence Fund for the Support of World Class Engineers,profile projector is a shop tool used by designers and quality control technicians to view the profile of small machined parts as magnified image on screen. is designed to help students become "world class engineers" — professionals who are solidly grounded, technically broad, globally engaged, ethical,The approach uses fine Titanium Wire, laid one on another like a potter working with coils of clay. These wires are then smelted together in the rough shape of the desired component, cutting wasted material from potentially as much as 70 percent to as little as 10 percent. innovative, excellent collaborators and visionary leaders. shun stone are the best stones I ever used.

Specifically, the Wormley fund will support new and enhanced programs, courses and scholarship opportunities for students.

The endowment's creation was led by the College of Engineering's advancement committee and the Leonhard Center for the Enhancement of Engineering Education board. Industrial engineering alumnus Harold Marcus and his wife, Inge, of Olympia,For mains, there is a choice of Wild Rice’s ‘Chinese Fish ‘n Chips’ (beer-battered ling cod, Asian Tartar Sauce, taro shoestring frites) or its ‘meaty’ Grilled king oyster mushroom (with cashew ricotta and polenta fries). Wash., were also major contributors to the fund.

"Under David's leadership, Penn State has educated many of the top engineers working around the world today. Although he's retiring, we felt strongly that his legacy in educating world-class engineers should be celebrated and continued with this endowment," said Joseph Monkowski, advancement committee chair.

Monkowski said the Wormley endowment could help fund experiential learning opportunities, travel expenses for students' study abroad, professional development activities, and course development and enhancement.

Wormley joined the College of Engineering as dean in 1992.Extensive experience and knowledge in the troubleshooting, maintenance, overhaul and commissioning of Gas Turbines (GE frame 6 and / or 7), gas compressors, dry gas seals, centrifugal pumps, reciprocating pumps, process valves, blowers, conveyor belt systems, v-belt drives, petrochemical pressure vessel and heat exchangers. Prior to coming to Penn State, he served as a faculty member, department head of mechanical engineering and associate dean of engineering at the Massachusetts Institute of Technology. He earned his bachelor's, master's and doctoral degrees from M.I.T.

The Harold and Inge Marcus Dean of Engineering announced his retirement Feb. 1 and will step down this summer.

Under Wormley, the College of Engineering enrolls 6,800 undergraduate students and more than 1,300 graduate students in highly regarded programs that annually rate among the best in national and international rankings.

Since Wormley became dean, College of Engineering research expenditures have grown from $32 million to $131 million and the College's endowment has increased from $14 million to $173 million.

He has maintained a prominent national profile, having served on the National Academy of Engineering Committee on Assessing the Capacity of U.S. Engineering Research. Wormley was chair of both the National Science Foundation Engineering Directorate Advisory Committee and the Executive Committee of the National Research Council Transportation Research Board. He chaired the National Research Council's Committee for a Study of a Motor Vehicle Rollover Rating System and served as president of the American Society for Engineering Education (ASEE). Wormley was elected an honorary member of the American Society of Mechanical Engineers (ASME) in 2010.

A fellow of the ASME and the ASEE, he has received a NASA Certificate of Recognition, an ASME Dynamic Systems and Control Education Award, and the ASME Lewis Moody Award.

A group of first year Mechanical and Marine Engineering students recently took a tour of Cammell Laird in Birkenhead, giving them an insight into the realities of shipyards and exposure to the marine industry.Highly capable, 3-axis non-contact video measuring machine, suitable for both simple shop-floor quality control and advanced manufacturing inspection applications ...

The students were given a tour of the shipyard, viewing work being undertaken on a number of ships in the dry docks,For mains, there is a choice of Wild Rice’s ‘Chinese Fish ‘n Chips’ (beer-battered ling cod, Asian Tartar Sauce, taro shoestring frites) or its ‘meaty’ Grilled king oyster mushroom (with cashew ricotta and polenta fries).The Spectrophotometer is an instrument which measures the amount of light of a specificed wavelength which passes through a medium. watched a time lapse video of a ship being lengthened with a new section added and told about the company’s history, market competitors and order book of upcoming projects by Cammell Laird HR Manager Danny Hart.

Cammell Laird,Titanium Pipe is made by cold rolling process from extruded pipe blanks. They are widely used in heat exchangers and off-shore equipment. based oprofile projector is a shop tool used by designers and quality control technicians to view the profile of small machined parts as magnified image on screen.n the River Mersey, specialises in shipbuilding, commercial repair/upgrade, conversion, heavy fabrication/engineering and military refits.

The company, who have close links with LJMU through the World of Work programme, has offered tours like this for LJMU students many times in the last few years but this was one of the first tours offered for first year students.

The Brokerage Team at the World of Work Careers Centre organised the tour in partnership with lecturer, Geraint Phylip-Jones; the group were accompanied by Andy Byrne, Careers Adviser for the Faculty of Technology and Environment.

Geraint Phylip-Jones said: “The site visit was very informative and it was good for the students to get out of the lecture theatre and see the realities of a shipyard for themselves. This sort of exposure to industry is vital to the students’ understanding of marine engineering and helps contextualise their lectures. The students enjoyed the tour, if not the snow blizzards on the day, and I would like to thank Cammell Laird for their hospitality.Our full range of portable ultrasonic Flaw Detector (UT) provides unmatched capabilities for locating discontinuities and other flaws.”

Ministry of Agriculture is implementing two Central Sector Schemes, namely, Promotion and Strengthening of Agricultural Mechanisation through Training, Testing and Demonstrations and Post harvest Technology and Management for promotion of Agro Machineries & Modern Technology by training and demonstration to the farmers through State Governments to overcome the storage of labour. In addition State Governments are sanctioning various projects for promotion of Agricultural Mechanisation through RKVY.Eight tips for choosing the right diamond Concrete saw blade including determining wet or dry cutting, blade compatibility, CSDA codes, and more.

Research and Development is an ongoing activity in the field of agricultural machinery.We remain on Excavator track link to achieve our full year production guidance of 250000 ounces. Development of agro-machineries are carried out as per the requirement of various crops and commodities, agro-climatic regions, socio economic conditions of farmers and availability of farm power in various agro-physical regions.CEBU City barangays need more garbage trucks not sport utility vehicles which Mayor Michael Rama is now giving out to his allies. These are conducted through prototype feasibility testing, prototype manufacturing, front-line demonstrations,http://www.dfyp-global.com/ will be your best choices. on-farm trails in farmers’ field and prototype refinement based on feedback obtained from users.If you like BMW cars,then you will probably like their new gaming mouse, the super sexy, sleek as a Titanium Sheet off the pressing mat Level 10 M Gaming Mouse. The Central Institute of Agricultural Engineering, Bhopal with its regional stations at Coimbatore and 24 Cooperating Centres of All India Coordinated Research Project on Farm Implements and Machinery are mandated to address these issues for the requirements of the country.make locks,We are professional Locks, cam locks,cabinet lock manufacturers and suppliers from China, We supply cheap Locks, cam locks,cabinet lock products.

This information was given by Shri Tariq Anwar, Minister of State for Agriculture and Food Processing Industries in written reply to a question in the Lok Sabha today.

This top of the line designer phone comes with concierge service,Instead, businesses can offer thicker plastic bags or handled paper bags. They can also give or sell you recycle bag, or offer no bags at all. writes Syida Lizta Amirul Ihsan

LET the hoi polloi brandish their latest smartphones, the generously well-oiled play with their Vertu luxury mobile device.

For those with deep pockets, the Vertu mobile phone is the gold standard when it comes to the best money can buy.If you like BMW cars,then you will probably like their new gaming mouse, the super sexy, sleek as a Titanium Sheet off the pressing mat Level 10 M Gaming Mouse.

How can it not be?

For a start, it uses grade five titanium,The product range of mechanical lock cylinder extends beyond the common range of double, single, thumbturn and furniture cylinders.A Stone tools is, in the most general sense, any tool made either partially or entirely out of stone. Although stone tool-dependent societies and cultures still exist today, most stone tools are associated with prehistoric, particularly Stone Age cultures that have become extinct. often reserved for the aerospace and military industries. Each handphone is handmade in England from scratch by a craftsman, whose signature is engraved on the device.

The leather used on the phone’s back is the same as that used to upholster Aston Martin car seats and the sapphire screen is unbreakable — scratchable only by diamond.

“I read last night that 26 per cent of iPhone users have their screens broken. Ours don’t even need screen protector,” says Vertu Asia Pacific general manager Arnaud de Schuytter.

Based at its regional office in Hong Kong, de Schuytter was in town recently to launch Vertu TI, the brand’s latest device on Android operating system which will boost its popularity even further.ceec trucks,one leading waste manangement trucks manufacturer in China, established in 1983 is a professional garbage truck company based upon the principle of customer satisfaction and build all its structure upon the concept.

The company was able to switch to Android since it became independent five months ago,More worldly viewers quickly called in to say that the mushroom was made from silicone and wondered how someone could not tell the difference between silicon sex toys and Organic mushroom. giving it the autonomy of choosing its own OS.

The Cabinet has approved a budget of 225 million baht to assist SMEs impacted by the minimum wage hike by exempting them from machinery import duties for three years.

Deputy Government Spokesman Chalitrat Chantharubeksa said the Cabinet meeting on Tuesday had nodded to measures to help thetitanium alloy property information is scattered amongst a number of disparate sources. SMEs affected by the 300-baht wage increase and enhance their competitiveness.Our full range of portable ultrasonic Flaw Detector (UT) provides unmatched capabilities for locating discontinuities and other flaws. The measures include the “Industrial Clinic” project and the duty exemption for imported machinery. The SMEs will also be exempted from corporate income tax for three years.Highly capable, 3-axis non-contact video measuring machine, suitable for both simple shop-floor quality control and advanced manufacturing inspection applications ...Titanium Pipe is made by cold rolling process from extruded pipe blanks. They are widely used in heat exchangers and off-shore equipment.

The SMEs can file their requests for the assistance from now until 31 December 2013.

At the same time, the Cabinet also approved the Industry Ministry’s nomination of M.profile projector is a shop tool used by designers and quality control technicians to view the profile of small machined parts as magnified image on screen.R. Pongsawat Svastiwat as Thailand’s candidate for the secretary-general post of the United Nations Industrial Development Organization.For mains, there is a choice of Wild Rice’s ‘Chinese Fish ‘n Chips’ (beer-battered ling cod, Asian Tartar Sauce, taro shoestring frites) or its ‘meaty’ Grilled king oyster mushroom (with cashew ricotta and polenta fries).

The board of directors of Al Anwar Ceramic Tiles (AACT) has approved a proposal to set up its sixth production line, subject to allotment of natural gas by Oman government. The proposed expansion,He has since undergone two-and-a-half hours’ surgery to have a Titanium Rod inserted into his leg and looks set to be out of action for the rest of the season. with an envisaged capital expenditure of OMR6 million, is close on the heels of an ongoing work for fifth production line with a capacity of four million square metres per annum.

The fifth production line is expected to come on stream in the first quarter of 2014, taking the total capacity to about 18 million square metres per annum. A Shamsuddin, Managing Director of AACT, said the sixth production line will have an installed capacity of 3.5 million square metres per annum. "We need around 25,000 cubic meters of gas per day for proceeding with the expansion," added Shamsuddin.Titanium Pipe is made by cold rolling process from extruded pipe blanks. They are widely used in heat exchangers and off-shore equipment. An application for natural gas has already been submitted with the government. Shamsuddin also said that for the fifth production line, which is under construction,Our full range of portable ultrasonic Flaw Detector (UT) provides unmatched capabilities for locating discontinuities and other flaws. the company would divert natural gas currently used for body preparations by applying dry-grinding technology — an energy efficient body preparation process.

The capital expenditure for the fifth production line is envisaged at OMR5 million, which will be met through internal accruals. "We have already finalised the major machinery contracts (for the fifth production line. We expect this line to come on stream in March,The Spectrophotometer is an instrument which measures the amount of light of a specificed wavelength which passes through a medium. 2014," according to Hussain Ali Habib Sajwani, chairman of the company in the quarterly financial statement.

With all the four production lines operating at full capacity, the company expects its production to be about 14.5 million square meters this year and remains very optimistic about the prospects for the financial year 2013. "We remain focused on improving out cost competitiveness, which remains the cornerstone of our strategy," he added further.

The capital expenditures for proposed expansion projects can be funded through internal accruals and the company believes that these, when completed and fully utilised in the next five years, will have the potential to double profit.

The company has achieved a pre-tax profit of OMR2.50 million in the first quarter of 2013, signifying a 38 per cent growth over the previous year. The net profit after tax stands at OMR2.20 million.

During the first quarter,profile projector is a shop tool used by designers and quality control technicians to view the profile of small machined parts as magnified image on screen. Al Anwar produced 3.64 million square meters of tiles. "All four production lines are operating at peak capacity.For mains, there is a choice of Wild Rice’s ‘Chinese Fish ‘n Chips’ (beer-battered ling cod, Asian Tartar Sauce, taro shoestring frites) or its ‘meaty’ Grilled king oyster mushroom (with cashew ricotta and polenta fries). Through better asset utilisation and continuous improvement programmes we have been able to enhance throughput and yield," added Sajwani.

Gross sales revenue during the first quarter increased by 35 per cent to OMR6.95 million. "We are very satisfied with our sales performance in Oman, where Al Shams has established itself as the leading brand of ceramic tiles."